Pump capacity: 1000 litres/min
• Lifting height: 30 metres
• Maximum suction depth: 8 m
• Motor: single-cylinder, four-stroke, air-cooled
• Inlet and outlet diameter: 3″ 80 mm
• Motor power: 6,5 HP / 3600 rpm
• Engine starting: manual
• Fuel: unleaded petrol
• Tank capacity: 3,6l
• Oil tank capacity: 163ml
• The pump engine has an oil sensor (ignition is disabled if the oil level is too low)
• Fuel consumption: 1,1 l/h
• Pump speed: 4000 rpm
• Protection rating: IP21
• Dimensions: 510×390×430mm
• Weight: approximately 30 kg
The device is designed to pump water from flooded areas and rooms, swimming pools, ponds, drainage ditches and similar locations.
The pump is suitable for clean and dirty water.
The water pump meets strict safety standards.
The pump has a reliable four-stroke OHV engine. Its hose fittings are metal rather than the plastic fittings used on some competing motor pumps.













